Bentone B30A2.2H, Инструкция по установке и обслуживанию

Страница: 12 / 20

171 505 45 09-01
INSTRUCTIONS PUMP TYPE SUNTEC A2L 65C - 75C
Suction line tables
The suction line tables consist of theo-
retically calculated values where the
pipe dimensions and oil velocity have
been matched so that tur-bulences will
not occur. Such tur-bulences will result
in increased pressure losses and in
acoustic noise in the pipe system. In
addition to drawn copper piping a pipe
system usually comprises 4 elbows, a
non-return valve, a cut-off valve and
an external oil fi lter.
The sum of these individual resi-
stances is so insignifi cant that they
can be disregarded. The tables do not
include any lengths exceeding 100
m as experience shows that longer
lengths are not needed.
The tables apply to a standard fuel
oil of normal commercial quality
accor-ding to current standards. On
commis- sioning with an empty tube
system the oil pump should not be
run without oil for more than 5 min.
(a condition is that the pump is being
lubricated during operation).
The tables state the total suction line
length in metres at a nozzle capacity
of 9,5 Gph. Max. permissible pres-
sure at the suction and pressure side
is 2,0 bar.
Components
1. Nozzle outlet G 1/8" Stage 2
2. Pressure gauge port G 1/8"
3. Nozzle outlet G 1/8" Stage 1
4. Pressure gauge port G 1/8"
5. Vacuum gauge port G 1/8"
6. Return line G 1/4"
and internal by-pass plug
7. Suction line G 1/4"
8. Return plug
9. Pressure adjustment
10. Solenoid valve 1
11. Solenoid valve 2
Technical data
One or two-pipe system.
Viscosity range: 2-12 mm
2
/S
Pressure range: 8-15 bar
Rated voltage of coil: 220/240V
50/60 Hz
Oil temperature: max 60°C
1-pipe system
Height Pipe diameter
H ø6 mm
m m
With an underlying tank a 1-pipe-
system is not recommended
Two-pipe system
Height Pipe diameter
H ø8mm ø10mm ø12mm ø14mm
m m m m m
0,0 20 54 116 150
-0,5 17 48 103 150
-1,0 15 41 89 150
-2,0 9 28 61 116
-3,0 4 14 33 65
-4,0 0 0 6 14
1-pipe system
Height Pipe diameter
H ø6 mm ø8 mm ø10 mm
m m m m
4,0 45 144 150
3,0 39 127 150
2,0 34 109 150
1,0 28 92 150
0,5 26 83 150
0,0 23 74 150
Two-pipe system
Height Pipe diameter
H ø8mm ø10mm ø12mm ø14mm
m m m m m
4,0 42 108 150 150
3,0 36 94 150 150
2,0 31 81 150 150
1,0 26 68 144 150
0,5 23 61 130 150
0,0 20 54 116 150
H
H