330500 Velomitor Sensor, 330525 Velomitor XA Sensor, 330530 Radiation Resistant Velomitor Sensor Operation Manual
20
prevent physical damage route the cable through conduit. Before pulling cable
through conduit, wrap the connector or terminals with tape or a similar covering
to protect them from damage. Ensure that the cable does not rub against rough
or sharp surfaces.
The radiation resistant cable 330533 is built from materials that are tolerant to
gamma-radiation, but the life of the cable can be extended, if during installation,
the cable should be routed in a manner to shield or keep the maximum distant
between the cable and the radiation sources.
One possible installation scenario involves piping which the fluid has radioactive
material floating in it. In this instance you should not strap the cable to the piping,
but instead try to route the cable away from the radiation source as soon as the
cable leaves the sensor’s connection interface.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
