Bentel Security NormaOtto Series, Руководство пользователя

Страница: 22 / 24

Insertion of a new code
New code
+
Phase c) It is now possible to key in a new code. As each figure is keyed in, one of the
leds indicating the figures still to inserted to have a valid code, will go off.
Once the 5 digits of the code are keyed in, it is necessary to confirm by
pressing ENTER. At this point the code is accepted and memorized. return
to phase b) to programme another code if necessary.
4 digit codes Since code programming always requires the insertion of 5 digits, in order to
memorize codes of 4 digits, it is necessary to insert 0 as the last figure. This
means that codes of 5 digits , with 0 as the last number are not possible.
Exit from programming phase
To return to the normal operative phase, it is necessary to key in ENTER
1,2 or 3 times according to wether you are in phase a), b) or c) and in any
case until the yellow led, that indicates the programming phase goes off.
+
When the codes are being programmed it is advisable to write them down
by using the table hereunder because if they are forgotten, it is no longer
possible to pick them up. If for any reason, the access codes are lost, it is
possible by means of the proper procedure to return to the factory pro-
gramming. In this case consult the installer of the security system.
CODES DEFAULT PERSONAL SETTING
USERMAIN
( )
USER
( )
PANIC
( )
GROUP A
( )
GROUP B
( )
22
Alarm control panel
NORMA4
and
NORMA8