PAGE No 10
FOLLOW STEPS FOR REMOVING THE FAN AND
INJECTOR
3:1 REMOVE THE BURNER COVER, BY
UNSCREWING THE 4 ALLEN SCREWS (FIG.
14)
3:2 REMOVE THE COVER RING (A), BY
UNSCREWING THE SINGLE BUTTON HEAD
ALLEN SCREW (FIG. 15), TO GAIN ACCESS TO
THE INJECTOR.
3:3 UNCLIP THE IGNITION LEADS AND REMOVE
THE ALLEN SCREW, AND REMOVE AND
REPLACE THE ELECTRODE ASSEMBLY.
4
TO REPLACE THE IGNITION UNIT
FOLLOW STEPS FOR REMOVING THE
INJECTOR
4:1 UNPLUG THE IGNITION LEADS (FIG. 16)
4:2 REMOVE THE 2 ALLEN SCREWS AND
REPLACE WITH A NEW UNIT
3
TO REPLACE THE IGNITION ELECTRODES
SERVICE MANUAL
2:3 REMOVE THE 3 SCREWS HOLDING THE
BLAST TUBE IN POSITION. (FIG. 14)
NOTE: THE BURNER TRAY PRESSING IS
SHOWN CUT AWAY FOR CLARITY
2:4 REMOVE THE INJECTOR, USING A 16MM
LOCK SPANNER AND A 14MM SPANNER.
CARE MUST BE TAKEN NOT TO DAMAGE THE
IGNITION ELECTRODES WHEN
REMOVINGAND REPLACING THE INJECTOR.
REPLACEMENT IS THE REVERSAL OF
REMOVAL
BLAST RING
& 3
RETAINING
SCREWS
INJECTOR
14MM
LOCK
SPANNER
FLATS
FIG. 14
COVER RING
& ALLEN
SCREW
BURNER
COVER
BLAST
RING
ELECTRODE ASSY.
& ALLEN SCREW
IGNIGNITION
LEADS
FIG. 15
IGNITION
LEADS
ALLEN
SCREWS
FIG. 16
