PAGE No 9
SERVICE MANUAL
FOLLOW THE PROCEDURE FOR REMOVING THE
FAN (1:1 TO 1:9)
2:1 ROTATE THE HEATER ON TO ITS SIDE AND
REMOVE THE 4 ALLEN SCREW HOLDING THE
BURNER TRAY ASSEMBLY INTO POSITION
(FIG. 11).
2:2 REMOVE THE 2 LONG ALLEN SCREWS
HOLDING THE BURNER ON TO THE HEAT
EXCHANGER (FIG. 12).
2
TO REPLACE THE INJECTOR
2:3 REMOVE THE ‘P’ CLIP FROM THE GUARD,
AND REMOVE THE CAPILARY TUBE.
FROM THE CASING (FIG. 13), AND
CAREFULLY SLIDE THE COMPLETE BURNER
TRAY ASSEMBLY OUT OF THE BOTTOM
TRAY.
WHEN THE TRAY IS REMOVED THIS GIVES
ACCESS TO ALL OTHER SERVICEABLE ITEMS
(FIG. 13)
FIG. 11
REMOVE 4 SCREWS
FROM CASING
UNDERSIDE
FIG. 13
REMOVE THE
‘P’ CLIP
FIG. 12
