51
Using the projector
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
15. After the start-up logo, press
MENU/EXIT
and then press / until the
System Setup :
Advanced
menu is highlighted.
16. Press to highlight
Lamp Settings
and press
MODE/ENTER
. The
Lamp Settings
page displays.
17. Highlight
Reset Lamp Timer
and press
MODE/ENTER
. A warning message displays asking if you
want to reset the lamp timer. Highlight
Reset
and press
MODE/ENTER
. The lamp time will be
reset to "0".
12. Replace the lamp cover on the projector.
13. Tighten the screws that secure the lamp cover on both sides
of the projector.
• Loose screws may cause a bad connection, which could result in
malfunction.
• Do not over tighten the screws.
14. Connect the power and restart the projector.
2
1