43
Using the projector
Audio Setup
menu
Display
menu
Function
Description
Mute
See
"Muting the sound" on page 34
for details.
Volume
See
"Adjusting the sound level" on page 34
for details.
Power On/Off Ring
Tone
See
"Turning off the Power On/Off Ring Tone" on page 34
for details.
Function
Description
Aspect Ratio
There are several options to set the picture’s aspect ratio depending on your
input source. See
"Selecting the aspect ratio" on page 35
for details.
Keystone
Corrects any keystoning of the picture. See
"Correcting picture distortion" on
page 27
for details.
Position
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum.
This function is only available when the PC signal is selected.
Overscan Adjustment
Conceals the poor picture quality in the four edges. You can also manually press
/ to decide how much to be concealed. Setting 0 means the picture is
100% displayed. The greater the value, the more portion of the picture is
concealed while the screen remains filled and geometrically accurate.
PC & Component
YPbPr Tuning
H.Size
Adjusts the horizontal width of the picture.
This function is only available when the Component or PC signal is
selected.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the Component
or PC signal is selected.
Auto
Adjusts the phase, and frequency automatically
This function is only available when the PC signal is selected.
Digital Zoom
See
"Magnifying and searching for details" on page 36
for details.
Film Mode
See
"Setting Film Mode" on page 33
for details.
3D Comb Filter
See
"Setting 3D Comb Filter" on page 33
for details.
