19
Operation
Operation
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press
on the projector or
on the remote
control to start the projector. The power indicator
flashes green and stays green when the projector is on.
The start up procedure takes about 30 seconds. In the
later stage of start up, a startup logo is projected.
(If necessary) Rotate the focus ring to adjust the image
clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you through
setting up the projector. If you have already done this, skip this step and move on to step 5.
• Use the arrow keys (
/ / /
) on the projector or remote control to move through the menu items.
• Use
OK
to confirm the selected menu item.
The Setup Wizard screenshots below are for reference only and may differ from the actual design.
Step 1:
Specify
Projector Position
.
For more information about projector
position, see
Choosing a location
.
Step 2:
Specify OSD
Language
.
Step 3:
Specify
Vertical Keystone
.
For more information about vertical
keystone, see
Correcting keystone
.
