8
Command table
Available features differ by projector specification, input sources, settings, etc..
Commands are working if the standby power is 0.5W or a supported baud rate of the projector is set.
Uppercase, lowercase, and a mixture of both types of characters are accepted for a command.
If a command format is illegal, it will echo
Illegal format
.
If a command with correct format is not valid for the projector model, it will echo
Unsupported item
.
If a command with correct format cannot be executed under certain condition, it will echo
Block item
.
If RS232 control is performed via LAN, a command works whether it starts and ends with
<CR>
. All the commands and
behaviors are identical with the control through a serial port.
Function
Type
Operation
ASCII
Support
Power
Write Power On
<CR>*pow=on#<CR>
YES
Write Power Off
<CR>*pow=off#<CR>
YES
Read
Power Status
<CR>*pow=?#<CR>
YES
Source
Selection
Write COMPUTER/YPbPr
<CR>*sour=RGB#<CR>
NO
Write COMPUTER 2/YPbPr2 <CR>*sour=RGB2#<CR>
NO
Write COMPUTER 3/YPbPr3 <CR>*sour=RGB3#<CR>
NO
Write Component
<CR>*sour=ypbr#<CR>
YES
Write Component2
<CR>*sour=ypbr2#<CR>
NO
Write DVI-A
<CR>*sour=dviA#<CR>
NO
Write DVI-D
<CR>*sour=dvid#<CR>
NO
Write HDMI(MHL)
<CR>*sour=hdmi#<CR>
YES
Write HDMI 2(MHL2)
<CR>*sour=hdmi2#<CR>
YES
Write HDMI 3
<CR>*sour=hdmi3#<CR>
NO
Write Composite
<CR>*sour=vid#<CR>
NO
Write S-Video
<CR>*sour=svid#<CR>
NO
Write Network
<CR>*sour=network#<CR>
YES
Write USB Display
<CR>*sour=usbdisplay#<CR>
NO
Write USB Reader
<CR>*sour=usbreader#<CR>
NO
Write HDbaseT
<CR>*sour=hdbaset#<CR>
NO
Write DisplayPort
<CR>*sour=dp#<CR>
NO
Write 3G-SDI
<CR>*sour=sdi#<CR>
NO
Write Smart System
<CR>*sour=smartsystem#<CR>
TBD
Read
Current source
<CR>*sour=?#<CR>
YES
Audio Control
Write Mute On
<CR>*mute=on#<CR>
YES
Write Mute Off
<CR>*mute=off#<CR>
YES
Read
Mute Status
<CR>*mute=?#<CR>
YES
Write
<CR>*vol=+#<CR>
YES
Write Volume -
<CR>*vol=-#<CR>
YES
