Operation
62
Function
Description
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector or
ON on the remote control when
the projector is in standby mode and the signal is feed through the VGA
cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
"Setting Auto Power Off " on
page 67
for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
This function is only available when Instant Restart is off.
Instant Restart
Selecting On enables you to restart the projector immediately within 90
seconds after turning it off.
This function is only available when Quick Cooling is off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
"Hiding the image" on
page 35
for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
4.
SYSTEM SETUP: Basic menu
