Operation
54
Using the USB Camera
1.
Plug the USB camera to the projector’s USB Type A port. For supported USB camera
list, visit
http://www.ideasonboard.org/uvc/#footnote-1.
2.
Open the Projector Network Display System and log in.
3.
Go to the Basic page and click Connect in the USB Camera row. Images captured by
the USB camera will be displayed in a pop out page.
Shutting down the projector
1.
Press
POWER on the projector or
OFF on the remote control, and a
confirmation message will be displayed prompting you.
If you don't respond in a few seconds, the message will disappear.
2.
Press
POWER a second time. The POWER indicator light flashes orange, the
projection lamp shuts down, and the fans will continue to run for approximately 90
seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
