![background image](http://html.mh-extra.com/html/benq/mh534/mh534_user-manual_2733755043.webp)
Operation 43
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
•
Menu display Time
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu
sets the length of time the OSD will remain active after your last key press. The
time length ranges from 5 to 30 seconds in 5-second increments. Use
/
to
select a suitable time frame.
•
Menu Position
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu sets
the OSD position in five locations. Use
/
to select a preferred position.
•
Language
in the
SYSTEM SETUP: Basic
menu sets your familiar language for
for details.
•
Reminder message
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu
sets whether to display reminder messages on screen. Use
/
to select your
desired setting.
•
Splash Screen
in the
SYSTEM SETUP: Basic
menu sets a preferred logo
screen to be displayed during projector start-up. Use
/
to select a screen.
•
Fan Speed Mode
in the
SYSTEM SETUP: Advanced
menu is used when the
projector is installed a filter cover. Use
/
to set to
High
. See
dust filter (Optional accessory)" on page 65
for details.
Select the lamp saver mode
• Using the remote control.
Press
SMART ECO
to select
Normal
/
Economic
/
SmartEco
.
• Using the OSD menu.
1.
Go to
SYSTEM SETUP: Advanced
>
Lamp Settings
>
Lamp Mode
.
2.
Press
/
to select
Normal
/
Economic
/
SmartEco
. The lamp brightness vary from
the different lamp mode,see the description list in table below.
If the Economic mode or SmartEco mode is selected, the light output will
be reduced and result in darker projected pictures.
Lamp Mode
Description
Normal
Provides full lamp brightness
Economic
Lowers brightness to extend the lamp life and decreases the
fan noise
SmartEco
Adjusts the lamp power automatically depending on the
content brightness level