3. Establishing a Wireless Connection
Once the wireless receiver is connected to your PC, a wireless connection will need
to be established between it and the mouse. Please do the following steps in order to
establish a wireless connection:
Step 1: To ensure correct operation, please make sure that the receiver is installed at
least 20cm (8 inches) away from electronic devices (such as monitors or
speakers) and no more than 150cm (7 feet) away from where the mouse will
be used.
Step 2: Ensure the Mouse and Wireless Receiver are set up as described in
Section 1
- Battery Installation
and
Section 2 - Hardware Installation.
Step 3: Prepare a paper clip, pen, toothpick or other pointed object.
Step 4: To begin activation, first press the CONNECT button on the receiver, and
then (using the pointed object) press the CONNECT button located on the
bottom of the mouse within 3 seconds of each other.
4