![background image](http://html.mh-extra.com/html/benq/lx60st/lx60st_user-manual_2733745034.webp)
Operation
34
To cancel the timer, perform the following steps:
1.
Go to the
SYSTEM SETUP: Basic > Presentation Timer
menu and highlight
Off
. Press
MODE/ENTER
. A confirmation message is displayed.
2.
Highlight
Yes
and press
MODE/ENTER
to confirm. You will see the message
“
Timer is Off
” appearing on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function.
See
"Connection" on page 17
for details.
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
PAGE UP/PAGE
DOWN
on the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
®
Windows
®
98 operating system. Windows
®
XP or
higher operating systems are recommended.
Freezing the image
Press
FREEZE
on the remote control to freeze the image. The word “
FREEZE
” will be
displayed in the upper left corner of the screen. To release the function, press any key on
the projector or remote control.
If your remote control has the following keys, please note that they cannot be pressed to release the function:
LASER
, #1, #4,
PAGE UP/PAGE DOWN
.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.
Hiding the image
In order to draw the audience's full attention to the presenter, you can use
ECO BLANK
on the projector or remote control to hide the screen image. The word “
ECO BLANK
”
appears in the corner of the screen while the image is hidden. When this function is
activated with an audio input connected, the audio can still be heard.
You can set the blank time in the
SYSTEM SETUP: Basic > Operation Settings >
Eco Blank Timer
menu
to let the projector return the image automatically after a period
of time when there is no action taken on the blank screen. The length of time can be set
from 5 to 30 minutes in 5-minute increments.
If the preset time spans are not suitable for your presentation, select
Disable
.
No matter
Eco Blank Timer
is activated or not, you can press most of the keys on the
projector or remote control to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to become heated and
deformed or even cause a fire.