BenQ LX60ST страница 52 Скачать руководство пользователя

Страница: 52 / 60

Troubleshooting

The projector does not turn on.

No picture

Blurred image

Remote control does not work

The password is incorrect

Cause

Remedy

There is no power from the power cord.

Plug the power cord into the AC power jack on
the projector, and plug the power cord into the
power outlet. If the power outlet has a switch,
make sure that it is switched on.

Cause

Remedy

The video source is not turned on or
connected correctly.

Turn the video source on and check that the signal
cable is connected correctly.

The projector is not correctly connected
to the input signal device.

Check the connection.

The input signal has not been correctly
selected.

Select the correct input signal with the

SOURCE

key on the projector or remote control.

The lens cover is still closed.

Open the lens cover.

Cause

Remedy

The projection lens is not correctly
focused.

Adjust the focus of the lens using the focus ring.

The projector and the screen are not
aligned properly.

Adjust the projection angle and direction as well
as the height of the projector if necessary.

The lens cover is still closed.

Open the lens cover.

Cause

Remedy

The batteries are out of power.

Replace the batteries with new ones.

There is an obstacle between the remote
control and the projector.

Remove the obstacle.

You are too far away from the projector.

Stand within 8 meters (26 feet) of the projector.

Cause

Remedy

You do not remember the password.

Please see

"Entering the password recall

procedure" on page 25

for details.

Содержание LX60ST





























































Результаты поиска

Содержание LX60ST

Отзывы:

Похожие инструкции для LX60ST

Бренды по названию

Популярные бренды

BenQ LX60ST, Руководство пользователя

Результаты поиска

Содержание LX60ST

Отзывы:

Похожие инструкции для LX60ST

Бренды по названию

Популярные бренды