Operation
61
FUNCTION
DESCRIPTION
Closed Caption
Closed Caption Enable
Activates the function by selecting
On
when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and sound
effects of TV programs and videos that are closed captioned (usually
marked as "CC" in TV listings).
Set your screen aspect ratio to 4:3. This function is not available
when the aspect ratio is “16:9”, “16:10” or “Real”.
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Standby
Settings
Network
• Enable Network Standby Mode
Selecting
On
enables the function. The projector is able to provide the
network function in standby mode. Selecting Off disables the function.
The projector does not provide the network function in standby mode.
• Switch to normal standby mode
Allows the projector to disable the network function after a set period
of time after it enters standby mode. For instance, if 20 min is selected,
the projector is able to provide the network function for 20 minutes
after it enters standby mode. When 20 minutes is up, the projector
enters normal standby mode.
This function is only available when Enable Network Standby
Mode is On.
Monitor Out
Selecting
On
enables the function. The projector can output a VGA
signal when it is in standby mode and the
PC IN
and
MONITOR-OUT
jacks are correctly connected to devices. See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
The Monitor Out only works when an appropriate D-Sub input is
made to the PC IN jack.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
/
to
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
