29
Menu operation
INSTALLATION menu
3D
(Continued)
•
3D Sync Invert
When your 3D image is distorted, enable this function to switch between the image
for the left eye and the right eye for more comfortable 3D viewing experience.
•
3D Switch Reminder
Displays a message during the projector start-up to remind that it is necessary to
turn on the 3D function if you want to enjoy 3D contents.
HDR
The projector supports HDR imaging sources. It can automatically detect the
dynamic range of the source, and optimize settings to reproduce contents under
wider dynamic range. Meanwhile, the
Picture Mode
cannot be adjusted after
switching to HDR. If the input source is not defined with dynamic range, you can
also manually select
HDR10
,
HLG
, or
SDR
for it.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location on page 11
Test Pattern
Adjusts the image size and focus and check that the
projected image is free from distortion.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input
signal source.
•
Auto
: Scales an image proportionally to fit the
projector's native resolution in its horizontal or vertical
width.
•
Real
: Projects an image as its original resolution and
resizes it to fit within the display area. For input signals
with lower resolutions, the projected image will be
displayed in its original size.
•
4:3
: Scales an image so that it is displayed in the center
of the screen with a 4:3 aspect ratio.
•
16:9
: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio.
•
2.4:1
: Scales an image so that it is displayed in the
center of the screen with a 2.4:1 aspect ratio.
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:9 picture
