23
Menu operation
Menu operation
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
PICTURE menu
Picture Mode
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
•
Bright
: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
•
Vivid
: Being slightly brighter than
Cinema
mode, it is suitable for playing movies
in rooms where there is a small amount of ambient light, e.g. your living room.
•
Cinema
: With well-balanced color saturation and contrast with a low brightness
level, this is most suitable for enjoying movies in a totally dark environment (as you
would find in a commercial cinema).
•
Silence
: Minimizes the acoustic noise. It is suitable for the need of watching
movies that requires an ultra-quiet environment so that you won't be disturbed by
the noise of the projector. When this mode is used, the following menu functions
will be automatically changed to the designated settings and grayed out.
•
XPR
:
Off
•
Light Mode
:
Economic
•
User 1
/
User 2
: Recalls the settings customized based on the current available
picture modes. See
User Mode Management on page 24
•
3D
: Optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
•
HDR
: Delivers High Dynamic Range effects with higher contrasts of brightness
and colors. This mode is only available when:
1.
DISPLAY
>
HDR
is set at
Auto
, and HDR content is detected.
2.
DISPLAY
>
HDR
menu is set at
HDR
.
