background image

44 

Maintenance  

English

Lamp Information

Calculation of lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the 
built-in timer. The method of calculating the equivalent lamp hour is as follows:

Total (equivalent) lamp hour

= 1 (hours used in Economic mode) +3/2 (hours used in normal mode)

See 

"Lamp Settings" on page 40

 for more information on Economic mode.

The lamp hour in Economic mode is calculated as 2/3 of that in normal mode. That is, using the projector in 
Economic mode helps to extend the lamp hour by 1/3.

Warning message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please 
install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some 
instances the lamp may explode.

For more detailed information on projector warnings, please refer to 

"Indicators" on page 47

.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the 
power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning 
the power back on, please contact your dealer.

The following Lamp warning displays will remind you to change the lamp.

Message

Status

Total (equivalent) lamp hour has reached 2000 hours. Install a new 
lamp for optimal performance. 

Total (equivalent) lamp hour has reached 2950 hour. A new lamp 
should be fitted to avoid the inconvenience when the projector runs out 
of lamp time.

Total (equivalent) lamp hour has reached 3000 hours. It is strongly 
recommended that you replace the lamp at this age. The lamp is a 
consumable item. With the usage time increase, the lamp brightness 
diminished gradually. This is normal lamp behaviour. You can replace 
the lamp whenever you notice that the brightness level has significantly 
diminished. If the lamp is not replaced beforehand, it must be replaced 
after 3000 hours usage

NOTICE: Order replacement lamp

Lamp > 2000hrs

Projector will stop at 3000hrs

OK

WARNING

NOTICE: Replace lamp soon

Lamp > 2950hrs

Projector will stop at 3000hrs

OK

WARNING

NOTICE: Replace lamp now

Lamp > 3000hrs

Lamp-usage time exceeded

OK

WARNING

Содержание Home Entertainment W500























































Отзывы: