11
Introduction
English
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected image. See
"Fine-
tuning the image size and clarity" on page 26
for
details.
2. Zoom ring
Adjusts the size of the image. See
"Fine-tuning the
image size and clarity" on page 26
for details.
3.
POWER
Turns the projector on or off. See
pages 23, 34 and
47
for details.
4. POWER indicator light
Lights up or flashes when the projector is
operating. See
"Temperature information" on
page 47
for details.
5. MENU
Toggles the On-Screen Display (OSD) menu on
and off. See
"Using the menus" on page 36
for
details.
6. Keystone /Arrows buttons (
e
Left,
c
Up,
f
Right,
d
Down)
Manually corrects distorted images resulting from
an angled projection. See
"Correcting two-
dimensional keystone" on page 26
for details.
When the On-Screen Display (OSD) menu is
activated, the buttons are used as directional
arrows to select the desired menu items and to
make adjustments. See
"Using the menus" on
page 36
for details.
7. MODE
Sequentially selects a predefined picture setting
available for each input. See
"1. Selecting a picture
mode" on page 28
for details.
8. ENTER
Enacts the selected On-Screen Display (OSD) menu
item. See
"Using the menus" on page 36
for details.
9. TEMPerature warning light
Lights up or flashes if the projector’s temperature
becomes too high. See
"Temperature information"
on page 47
for details.
10. LAMP indicator light
Lights up or flashes when the projector lamp has
developed a problem. See
"Temperature
information" on page 47
for details.
11. EXIT
Exits and saves any changes made using the On-
Screen Display (OSD) menu. See
"Using the menus"
on page 36
for details.
12. SOURCE
Sequentially selects the input signal D-SUB, HDMI,
Video, S-Video, COMP1 or COMP2. See
"Switching
input signal" on page 25
for details.
2
3
4
5
6
7
8
9
10
6
6
6
11
12
1
