BenQ GSI Outdoor Leisure Series, Руководство пользователя

Страница: 67 / 112

67
Charging the battery
There are two ways to charge the GS1 battery:
• Connect a traditional Micro USB Type-B power adapter to the Micro USB Type-B port at the rear of the battery.
• Install the projector onto the battery (see Installing the battery on page 68 for details), and then plug the supplied power adapter into the DC-IN
power jack at the rear of the projector.
When the projector is installed onto the GS1 Battery and a Micro USB adapter is plugged into the GS1 battery the following situations will occur:
• The adapter will charge the GS1 battery when the projector is powered off.
• The adapter will not provide power to both the battery or projector when the projector is powered on (i.e. projector will only run on battery
power when the projector is powered on).
• Due to differences in power adapter throughput the charging time for the two charging methods vary, with charging via the projector’s DC-IN power jack being faster
than charging via a Micro USB Type-B adapter.
• To view the charge level for the GS1 battery enter the
BenQ Launcher interface and check the battery icon at the top right of the screen.