BenQ G2010W, Руководство по обслуживанию

Страница: 19 / 41

19
Photo
Sharpness 不可调节
下的
Senseye Demo
自动变为
ON
2. Senseye Demo 处
于
ON
时
,
做
Auto
自动变为 OFF
sRGB
Sharpness
不可调节
Senseye Demo (ON/OFF) OFF
Full full
Display Mode
Aspect
Input (D-sub/DVI)
Language
-EU version: 14 languages
(English/Français/Deutsch/Italiano/Espanol/Po
lish/Czech/Hungarian/Serbo-croatian/Romani
an/Netherlands/Russian/Swedish/Protuguese)
-Asian version: 8 languages
(English/Francais/Deutsch/Italiano/Espanol/ 日
本語 / 繁體
中文 / 简 体中文 )
English
H. Position (0~100) 50
V. Position (0~100) 50
Display Time (5, 10, 15, 20, 25, 30) 15
OSD Settings
OSD Lock
(ON/OFF) （按 Menu 鍵 15s 即可解除鎖定）
OFF
DDC/CI (ON/OFF) - ON
Information - -
SYSTEM
Reset All (YES/NO) -
4.2.3.3. Factory Mode Introduction
When signal is input, press “power key” to turn off the monitor. Press “ENTER”+“MENU” +“Power” together to
turn on the monitor. After power on, press “MENU” to call out Main Menu, then press “-“for select the “F” item, then
press “Enter”, you can go into Factory mode.
AUTO: Automatically calibrate chip ADC parameter by using chip internal DAC.
GAIN: ADC gain value
OFFSET: ADC offset value
9300K: Set color temperature 9300K
5800K: Set color temperature 5800K
6500K: Set color temperature 6500K
USER: Set user preferred color temperature
LANGUAGE: Country language
Reset BL Hr: the time of backlight
Reset Total Hr: the total time when connect power
Return: exit the factory menu
4.2.3.4 After repair, to ensure the quality you should do the following test and adjustment