BenQ FP791 - 17" LCD Monitor, Руководство пользователя

Страница: 55 / 58

55 Troubleshooting
Troubleshooting
Frequently Asked Questions (FAQ)
The image is blurred:
Read the Installation/Adjustment section, and then select the correct resolution, refresh rate and
make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by
working through the instructions in the Installation/Adjustment section It is normal for blurring
to occur due to conduction losses in extension cables. You can minimize these losses by using an
extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the Installation/Adjustment section. Select the native resolution.
Pixel errors can be seen:
One of several pixels are permanently black, one or more pixels are permanently white, one or
more pixels are permanently red, green, blue or another color.
Read the Pixel error rates section.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
On the monitor, press key and press or key to move to the “Recall” icon and press key
to enter “Recall” sub menu. Press or key to select “Color Recall” and select “Yes” in “Color
Recall” sub menu, then press key to recall to factory settings. If the image is still not correct and
the OSD also has faulty coloration, this means one of the three primary colors is missing in the
signal input. Now check the signal cable connectors. If any pin is bent or broken off, please contact
your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means
you are using a display mode that this monitor does not support, please change the setting to one
of the supported mode. Please read the Supported operating modes section.