28 Operation (under Launcher source)
Wireless Connections
Connecting the projector to a wireless network
Before you can project wirelessly via the projector, you must connect your device to the same wireless
network as your projector. To connect your projector to a wireless network, or to switch wireless
networks:
1. Install the provided wireless dongle into the wireless dongle port (see
).
2. Power on the projector (see
Starting up the projector on page 19
3. On the home screen of the
BenQ Launcher
interface select the
Settings
button and press
OK
.
4. Select
Internet
in the
General
section of the
Settings
menu and then press
OK
.
If you have already connected the projector to a wireless network during the setup wizard you
may skip the steps in this section
