Preparing the camera for use 5
Eng
lish
Using multifunctional buttons
You can choose camera settings by pressing the 4-way control or the
button.
1.
Left/Focus
:
• Scrolls left in menus.
• Toggles between different focus modes.
2.
Up
:
• Scrolls up in menus.
• Turns on/off Face Tracking. See "Face Tracking"
on page 11 for details.
• Rotates an image. See "Rotating an image" on
page 34 for details.
3.
Right/Flash
:
• Scrolls right in menus.
• Selects a flash mode.
4.
Down
:
• Scrolls down in menus.
5.
: Confirms a chosen setting.
• Turn off the camera before removing the battery.
• Please fully charge the Li-ion battery before using it for the first time.
• When the battery is being charged, the status LED indicator flashes in green. When
the battery is fully charged, the status LED indicator is off.
• Use only the specified battery type. Using other types of battery may damage the
camera and invalidate the warranty.
• Ensure that the Li-ion battery is inserted into the product with correct polarity. Incorrect
polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to store
the camera for a long time.
• Damage caused by the use of an incorrect power adapter is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
4
4
5
5
5
E146X_UM - EN.book Page 5 Thursday, April 21, 2011 5:54 PM