BenQ DV3251, Руководство пользователя

Страница: 40 / 50

On-Screen Display (OSD) menu 36
En
gli
sh
Setup menu
1. Press the MENU button to display the menu.
2. Press the or buttons to select Setup and
then press OK to enter the submenu.
3. Press the or buttons to select an item.
4. In the Setup menu, use the or buttons to
adjust the setting or select the options.
5. To return to the menu one level up, press the
MENU button again.
Item Function Operation Range
Language
Select your desired language for
the OSD menu.
Use the and buttons on
the remote control or the
Volume and Volume
buttons on the display to
change the selection.
• English
• Français
• Nederlands
• Deutsch
• Italiano
• Español
Freeze
Freeze the motion on the screen
image (however, broadcast
continues).
• Off
• On
Backlight
Adjust backlight intensity.
If "Auto" is selected, the ambient
light sensor will be activated and
the display’s backlight will be
changed automatically according
to the ambient lighting condition.
• Auto
• Dark
• Normal
• Bright
Sleep Timer
Set the Sleep timer to
automatically turn off the display.
0, 30, 60, 90, 120,
150, 180 minutes
DPMS
The Display Power Management
System (DPMS) protects the
screen and enters power saver
mode when no PC signal is
detected.
• Off
• On
DVI Input
Select input signal type via DVI
input if a PC or Video output
device is connected to the display.
Remember to adjust the timing
settings of the output device
according to "Supported Video
(Component/DVI) Input Signal
Timing" or "Supported PC (D-
Sub/DVI) Input Signal Timing" on
page 40 .
• PC
• Video
Reset All
Settings
Restore all settings to their default
values.
The TV program settings will
not be reset.
Press the OK button on the remote control or the
Input button on the display to activate the reset.
DV3251-En.book Page 36 Monday, December 12, 2005 4:07 PM