BenQ DV3251, Руководство пользователя

Страница: 11 / 50

Section 1: Quick Start Guide 7
Eng
lish
8. View the TV programs
Care and cleaning information
• Always turn off the display by pressing the power button before cleaning.
• Do NOT use cream, liquid, aerosol or spray cleaners. Use only a slightly damp well wrung-
out (drip-free) and lint-free, clean soft cloth and lightly wipe the display.
• If necessary, use a pH-neutral liquid dish-washing detergent diluted with water on a
separate clean lint-free cloth to remove oil or grease marks. Wipe over again with a clean
dry lint-free cloth to remove any smear marks.
• Under close examination and in certain circumstances, you may notice that a few non-
active pixels appear on the screen as a fixed point of colour. Please note that this does not
affect the performance of your product as it is usually not visible at normal viewing
distances.
• If the display is not going to be used for an extended period of time (like when you’re going
away for holidays), it should be switched off and unplugged from the wall outlet. You
should also consider removing the batteries from the remote control (as they may leak).
What’s next?
You have reached the end of Section 1: Quick Start Guide. By now, you should have a
reasonable understanding of your new LCD display and its controls, know how to unpack,
install, connect, turn on, tune, change the programs, and how to care for and maintain it.
Should you wish to maximise your viewing experience pleasure, Section 2 of this booklet
contains the User's Manual which describes how to customise the display settings to suit your
preferences and viewing environment. It details the features and functions of the display and
the remote control, describes how to connect other devices, and provides product specifications
and troubleshooting information for your further assistance.
Press the Program or Program buttons on the remote control (as
highlighted in the illustration) or press the Program or Program
buttons on the top of the display to view the TV programs available in
your area.
You can also select a program directly by selecting the station number
using the numeric buttons on the remote control, For example, to select
program 8, press the
program selection button.
To select a double-digit program, press the Program entry button on
the remote control, and then enter the program number using the
program selection buttons. For example, to select program 28, press the
Program entry button, and then the
, program selection
buttons on the remote control.
The remote control features a program return button so that you can
quickly return to the previous viewed program, by pressing the
Recall
button (also highlighted in the illustration).
Please refer to the User’s Manual for further information about the
display and its operation.
The LCD display is a high resolution display device. To achieve the best
possible display results, it is recommended that you connect it to a
digital video source and set the source output resolution to match the
LCD display resolution then select an appropriate aspect ratio.
When viewing traditional (analog) TV source, it is recommended that you
set the aspect ratio to 4:3 or Wide.
See the User’s Manual for more information about aspect ratios and
settings.
To alter the volume, press the + or - button on the remote
control or the Volume up or Volume down button on the display.
The volume indicator will display on-screen.
DV3251-En-QuickStartGuide.fm Page 7 Tuesday, December 13, 2005 2:03 PM