BenQ DC 5530 User’s Manual
En
glis
h
Preparing Your DC C500 for Use
4
•
When using the camera in cold areas, keep the camera and battery warm by holding them
inside your outer cloth.
•
If you open the battery cover without removing the battery, the power will not be termi-
nated. If you remove the battery, you have to insert the battery again as soon as possible,
in order to make sure that the date and time will not be reset.
•
We recommend that the battery should be charged 12 hours for the initial use.
2.3
Inserting and removing an SD memory card
(optional accessory)
The DC C500 is equipped with 16 MB internal memory (14
MB available for image storage), allowing you to record
video clips and capture images. You can also expand the
memory capacity by using an optional SD (Secure Digital)
memory card to store more files.
1. Always make sure the camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct orientation as
shown in the illustration.
3. Close the battery / SD memory card cover.
To remove the SD memory card, make sure the camera is turned off. Press lightly on the
edge of the memory card and it will eject.
•
Be sure to format the SD memory card with this cam-
era before the initial use.
•
To prevent valuable data from being accidentally
erased from an SD memory card, you can slide the
write-protect tab (on the side of the SD memory card)
to “LOCK”.
•
To save, edit, or erase data on an SD memory card,
you must unlock the card.
•
SD memory card in the following sizes are supported: 8 MB, 16 MB, 32 MB, 64 MB, 128
MB, 256 MB, 512 MB, and 1 GB. The DC C500 is compatible with SD memory cards manu-
factured by Panasonic, Toshiba, and Sandisk. Please contact your local dealer for pur-
chase information.
DC_C500_UM.book Page 4 Monday, August 22, 2005 10:29 AM
