Benning Tebevert III, Руководство по эксплуатации и обслуживанию

Страница: 14 / 70

TEBEVERT III INVERTER SYSTEM (120 VDC)
07.11.2011 6 028-0009-006
2 GENERAL
The TEBEVERT III family of modular inverter systems consists of: modular
hot-plug, inverters, and an electronic static by-pass switch (SBS). All
electrical connections are automatically disconnected or connected when
the modules are pulled out of or pushed into the system cabinet. This may
take place during normal operation without interruption in power to the
connected load equipment. This design provides an uninterrupted supply
of AC current and satisfies the highest requirements with respect to the
expansion of the system, ease of maintenance and operating safety.
The TEBEVERT III is available for DC voltages of 120VDC. Each inverter
module is available in 5.0kVA/4.0kW. Parallel operation of maximum of
five (5) inverter modules provides a maximum system rating of
25.0kVA/20kW. The output voltage is 120VAC or 120/240VAC and can be
adjusted to 50Hz or 60Hz according to the application.
Warning!
Several inverter systems may not be operated in parallel.
This may lead to the destruction of the inverter systems.
3 THE COMPONENTS OF THE TYPICAL INVERTER
SYSTEM
The design and arrangement of the components of the inverter system are
generally standardized.
The standard components are:
•
(1) PSJ type equipment shelf
•
5 positions for the inverters
•
(1– 5) inverter modules
• (1) position for the static by-pass switch (SBS)
• (1) manual maintenance by-pass switch