Benning IT 100, Руководство по эксплуатации

Страница: 27 / 42

Operation
5.4 Resistance measurement or continuity test
5225 / 04/2022 en BENNING IT 100 27
5.4 Resistance measurement or continuity test
Requirements
• Please observe the requirements for measuring [ } page 24].
• Approved safety measuring lines
• Measuring ranges for resistance measurement [
}
page 22] or continuity test [
}
page 23]
• Measuring point must be free of voltage
Figure 9: Resistance measurement
Procedure
1. Set the rotary switch of the device to switch position “ ”.
2. Press the blue key to set the desired measuring function (resistance measurement or
continuity test).
3. Connect the safety measuring lines to the device [ } page 25].
4. Bring the safety measuring lines into contact with the measuring points and read the
measured value on the digital display.