11/ 2008
BENNING CM 9
5
D
angezeigt. Die Messgenauigkeit ist spezifiziert für eine Sinuskurvenform.
Die angegebene Genauigkeit ist spezifiziert für Leiter, die mit der Messzange
1
mittig umfasst werden (siehe Bild 2 bis 6). Für Leiter die nicht mittig umfasst
werden, muss ein zusätzlicher Fehler von 1 % des Anzeigewertes berücksichtigt
werden.
Filter-Dämpfungs-Charakteristik: - 24 db/ oct, Filter-Grenzfrequenz: 100 Hz
Einfluss eines Magnetfeldes von parallelen Leitungen: 0,002 % typischer Wert.
8. Messen mit dem BENNING CM 9
8.1 Vorbereiten der Messung
Benutzen und lagern Sie das BENNING CM 9 nur bei den angegebenen Lager- und
Arbeitstemperaturbedingungen, vermeiden Sie dauernde Sonneneinstrahlung.
- Starke Störquellen in der Nähe des BENNING CM 9 können zu instabiler
Anzeige und zu Messfehlern führen.
- Um die Bedienung zu erleichtern besitzt das BENNING CM 9 eine automa-
tische Hintergrundbeleuchtung. Sobald die Umgebungsbeleuchtung sinkt,
schaltet sich die Hintergrundbeleuchtung der Stromzangen ein.
8.2
Ableitstrommessung
8.2.1 Differenzstrommessung am Erdleiter
siehe Bild 2:
Differenzstrommessung am Erdleiter
8.2.2 Differenzstrommessung an einphasigen Systemen
siehe Bild 3:
Differenzstrommessung an einphasigen Systemen
8.2.3 Ableitstrommessung über Erdleiter (Ableiter) bei 3phasiger
Versorgung
siehe Bild 4:
Ableitstrommessung über Erdleiter (Ableiter) bei 3-phasiger
Versorgung
8.2.4 Differenzstrommessung, Verbraucher 3phasig gespeist, ohne
NLeiter
siehe Bild 5:
Differenzstrommessung, Verbraucher 3-phasig gespeist, ohne
N-Leiter
8.2.5 Differenzstrommessung, Verbraucher 3phasig gespeist, mit
NLeiter gespeist
siehe Bild 6:
Differenzstrommessung, Verbraucher 3-phasig gespeist, mit
N-Leiter gespeist
8.2.6 Wechselstrommessung
siehe Bild 7:
Wechselstrommessung
9. Instandhaltung
Vor dem Öffnen die BENNING CM 9 unbedingt spannungsfrei
machen! Elektrische Gefahr!
9.1 Sicherstellen des Gerätes
Unter bestimmten Voraussetzungen kann die Sicherheit im Umgang mit dem
BENNING CM 9 nicht mehr gewährleistet sein; zum Beispiel bei:
- Sichtbaren Schäden am Gehäuse,
- Fehlern bei Messungen,
- Erkennbaren Folgen von längerer Lagerung unter unzulässigen Bedin-
gungen und
- Erkennbaren Folgen von außerordentlicher Transportbeanspruchung.
In diesen Fällen ist das BENNING CM 9 sofort abzuschalten, von den Messstel-
len zu entfernen und gegen erneute Nutzung zu sichern.
9.2 Reinigung
Reinigen Sie das Gehäuse äußerlich mit einem sauberen und trockenen Tuch
(Ausnahme spezielle Reinigungstücher). Verwenden Sie keine Lösungs- und/
oder Scheuermittel, um das Gerät zu reinigen. Achten Sie unbedingt darauf,
dass das Batteriefach und die Batteriekontakte nicht durch auslaufendes Batte-
rie-Elektrolyt verunreinigt werden.
Falls Elektrolytverunreinigungen oder weiße Ablagerungen im Bereich der Bat-
terie oder des Batteriegehäuses vorhanden sind, reinigen Sie auch diese mit
einem trockenen Tuch.