BENNING IT 115
Device description
- 23 -
4.3 "SETTINGS" mode
Turn the measuring function selector switch to the "
SETTINGS
" mode in order to make the
following settings at the tester:
SELECT LANGUAGE
(GB, D, E, F, NL)
RCD TESTING
(according to EN 61008 / EN 61009,
IEC 60364-4-41, BS 7671, AS/NZS 3017)
SET I
SC
FACTOR
(0.20 - 3.00)
COMMANDER ON/OFF
INITIAL SETTINGS
(reset to factory settings)
Figure 4
.
3:
"SETTINGS" mode
Keys used:
UP / DOWN
Selects the respective option
TEST
Confirms the selected option
ESC / function selector
switch
Back / cancel without any changes
4.3.1 Language
In this menu, it is possible to select the respective
language.
Figure 4
.
4:
Selecting the language
Keys used:
UP / DOWN
Selects the language
TEST
Confirms the selected language and returns to the Settings menu
ESC
Back / cancel to the Settings menu
Function selector switch
Back / cancel to the selected measuring function
4.3.2 RCD testing
In this menu, it is possible to set the standard used for RCD
testing.
Figure 4
.
5:
Selecting the RCD standard
Keys used:
UP / DOWN
Selects the standard
TEST
Confirms the selected standard and returns to the Settings menu
ESC
Back / cancel to the Settings menu
Function selector switch
Back / cancel to the selected measuring function
