BENKISER 3515050, Руководство по установке и обслуживанию

Страница: 12 / 19

20 21
MAINTENANCE & ADjUSTMENTS MAINTENANCE & ADjUSTMENTS
ACCESSING THE FILTER
1
remove screw
2
∙ remove the black ring
and brass nut.
∙ Pull the cartridge from
body to expose the filter.
∙ reassemble in reverse
order.(see below for ring
position)
brass nut
cartridge
black ring
SETTING THE TEMPERATURE
note: the positioning of the black ring sets the maximum temprature.
1
align the black ring
a = 90°
tighten screw.
a
note: temperature is set based on input conditions as follows:
inlet pressure: 3 bar
inlet temp: hot : 60 - 65°c , usa /canada - 80 - 85 °c
cold : max 30°c
2
align gear knob (a) so that
the mark on the knob is
aligned with the notches on
the cartridge (b) and on the
valve body (c).
a
b
c
to lock temperature see section below
3
Assembly position for
Max 40
0
C
Place cap on the cartridge
so that the third red bar
aligns with the mark
on the valve body
Assembly position for the
US Max 46
0
C Degrees:
Place cap on the cartridge so
that the middle temperature
mark aligns with the mark
on the valve body.
4
use the screw to secure the
cap to the valve.
Place the cap cover on
the cap.