REQUEST OF GENERAL STATUS OF THE MODULE:
This command signal permits to receive some information on the device:
the number of messages sent, the number of transmitter codes preset in memory, the software and
firmware version of the GSM module, the network operator to which the device is connected, the number
of mobile phones stored in memory.
status 123456
where:
status
command string
123456
access password (this is the default password if it has not modified yet or if
the module has been just initialized)
REPLY:
Sms sent: 0; Tx rec: 0; Sw:1.0.0; Fw:1.0.0.; Op:vodafone; phs:n/200
where:
Sms sent: 0
number of SMS sent from the last time counters have been reset
Tx rec: 0
number of transmitters stored in the receiver
Sw:1.0.0
software version of the GSM board
Fw:1.0.0.
firmware of the GSM module
Op:vodafone
network operator
phs:n/200
phonebook status: number of phone numbers stored in memory / maximum
phone numbers storable in memory
STATUS REQUEST OF PRESETTING AND PERMITTED ACCESSES OF A NUMBER:
This command allows to know presetting (presetting of alarm and channel to be activated by phone call)
and permitted accesses (channels which can be activated by SMS) regarding one specific number stored
in memory.
numstatus 123456 3391234567
where:
numstatus
command string
123456
access password
3391234567
telephone number to be added to the list
REPLY:
ALARM:ON/OFF,CALL:1/2/3/4,ch1:ON/OFF,ch2:ON/OFF,ch3:ON/OFF,ch4:ON/OFF
where:
ALLARM:ON/OFF
notice of activated/deactivated alarm
CALL:1/2/3/4
number showing the channel which can be activated by phone call
ch1:ON/OFF
activation status of channel 1 by SMS
ch2:ON/OFF
activation status of channel 2 by SMS
ch3:ON/OFF
activation status of channel 3 by SMS
ch4:ON/OFF
activation status of channel 4 by SMS
READ LIST OF ENABLED PHONES:
This command permits to know the number of memorised phone numbers.
readbook 123456
where:
readbook
command string
123456
access password
REPLY:
n°1;n°2;n°3;
8
9
