Beninca BOB, Руководство пользователя

Страница: 14 / 32

14
TECHNICAL DATA BOB50M/BOB50ME
Power supply
230Vac 50/60Hz
Absorbed rating
310 W
Absorbed current 1,4 A
Thrust 3500 N
Jogging 30%
Protection degree IP44
Operating temperature
-20°C / +50°C
Capacitor
9 μF
Door leaf max. weight 600 kg
Useful stroke:
- with 2 mechanical stoppers
- with 1 mechanical stopper
- without mechanical stoppers
455 mm
485 mm
520 mm
Traversing speed 0,7 m/min
Noise level <70 dB
Lubrification Permanent grease
Weight
11,6 kg
8) ELECTRIC CONNECTIONS
The cables necessary for the installation of BOB can vary according to the accessories installed.
No connection cable is supplied.
Fig. 7 indicates the cables for standard installation.
List of cables
Connection Type
A Mains power supply to the control unit 3x1,5mm
2
B Motor connection 4x1,5mm
2
(3x0,5mm
2
BOB 50ME)
C Photocell transmitter connection 2x1,0mm 2
D Photocell receiver connection 4x1,0mm
2
E Key selector connection for external command 2x1,0mm
2
F Flashing signal light connection 2x1,5mm
2
G Connection of the aerial built-in the flashing light RG 58
Legenda
1
Motoreducer
2 Photo-electric cells
3 Key selector (external) or digital keyboard
4 Flash-light
5 Electronic board
The cables used must be suitable for the type of connection. For example, for connection protected by raceways use
H03VV-F cables, for cables in the outdoor environment always use the H07RN-F type.