BENETEAU FIRST 35, Руководство пользователя

Страница: 117 / 124

113
Launching
L
AUNCHING RE COMME NDATIONS
A lot of skill and care is required to commission your BENETEAU boat. The proper working of all your boat equipments in the
future results from the quality of the commissioning operations.
In order to remain completely under guarantee in the case of any failure of parts or materials the first launching and the first trials of
different equipment must be carried out by your BE NETEAU dealer.
If later you have to launch your boat yourself, you should take the following precautions:
B
E F ORE LAUNCHING
- If your boat is to be fitted with sounder and speedometer, allow for the relevant fittings and their installation.
- Check the water intake strain box for cleanliness.
- Check the engine and reduction gear oil levels (refer to engine manual).
- Turn off the engine cooling water drain valves.
- Retract the speedometer into its housing (it may be damaged by the handling belts).
- For the on-line engines, check the anode at the end of the shaft is in place. Check the nut tightening (the lock washer shall
be turned over onto the nut). The anode shall not be painted.
- Turn off all the water inlet and drain valves (sink, washbasin, heads, engine).
H
ANDLING
- Install a fore rope, a rear rope and fenders.
- When craning, check that no device is crushed by the belts (sounder, speedometer, shaft, etc.).
- Locate the strap positions using the stick-on markers. The belt position will be useful during the craning for a future
launching.
W
ARNING
-Do not stay on board or under the boat during
hoisting.
P
IE CE OF ADVICE
-
R
E COMME NDATION
-The proper working of all your boat equipments
in the future results from the quality of the
commissioning operations.