HD-SDI High Speed Dome Camera
4
1. Tools Lists:
You may need following tools for the installation:
Screws and nuts, screw driver, Small slotted screw driver, Wire cutter, Ladder, Drill, Saw.
2
、
Cables:
Video Coaxial Cable
The video coaxial cable should be:
1) 75 Ohm impedance.
2) Solid copper wire.
3) 95% braided copper shield.
Check the max transmission distance referring to the chart below.
International Gauge Transmission Distance( Max.)
RG 59/U
750ft (229m)
RG 6/U
1,000ft (305m)
RG 16/U
1,500ft (457m)
● R S4 85 communication cable
（
refer to appendix
Ⅲ
）
● 24VAC power cable
（
refer to appendix
Ⅳ
）
4
、
Please keep all package materials
After you disconnect package, please keep all package materials well, in case there is something wrong with speed dome,user can
re-pack speed dome and send it to agent or factory to repair it.
V. Installation Type Guide
Three main kinds of installation are available for high speed dome:
1) In-ceiling Mount
2) Surface Mount
3) Bracket Mount
There are 5 bracket options for bracket mount:
1) Wall Mount
2) Corner Mount
3) Pole Mount
4) Pendant Mount
NOTE:
Installation site should be able to withstand at least 4 times the weight of the dome.
Bracket mount dome has indoor type and outdoor type. Comparing to indoor type, outdoor type has extra sun-shield housing,
temperature sensor and heater. Outdoor type conforms to IP66 standard.
WARNING:
DO NOT install indoor dome in outdoor environment.
After installation, the outside appearance is following
：
⑴
In-ceiling mount
Camera with ceiling mount is suitable for suspend ceiling of indoor environment
