HD-SDI High Speed Dome Camera
2
Appendix VIII. Technology Parameter Chart-------------------------------------------------------------------------------------29
I
. Safety Precaution
1. Only qualified and experienced person can carry on this installation.
2. Always conform to national and local safety codes during installation.
3. Use reliable tools only, poor quality tools may cause danger. e.g. ladder.
4. Check the space and toughness of the site before installing. It should be able to bear 4 times the weight of the dome
and its accessories
5.Do install the speed dome to appropriate environment (Please refer to the chart below).
6. Keep all the original dome package materials in case of future repacking and transporting.
Model
Indoor
Outdoor
Max. Temperature Range
-10
～
+50
℃
-40
～
+60
℃
Humidity
<90%
<90%
Air Pressure
86
～
106Kpa
86
～
106Kpa
Power supply
24V/2.50A,50/60HZ
24V/2.50A,50/60HZ
7. Please refer to the user manual carefully.
II. Warning
1. Mind Transportation
Avoid press or to be stroked furiously In the process of transportation.
The product must be shipped in the form of accessories,
the product wouldn’t within guarantee policy if product is not accordance with
transportation term in the process of transportation.
2.Fault occur
If the products fumes or can’t work well, user should turn off power, stop to use the speed dome immediately, then connect to
supplier.
3.
Don’t dismantle or refit
Don’t dismantle shell, otherwise it will cause speed dome camera damaged. if user need to set some function or maintain the products,
please connect to supplier.
4. D
on’t put other substances into PTZ camera
Make sure there is not metal substance or flammable substance in camera. If there is other substances, it will cause camera short circuit
or damage. If water or liquid leak into camera, please turn off power immediately, then connect to supplier directly. Keep camera
carefully, avoid water or seawater to corrode.
5. Mind to carry product
In order to avoid damaged
, don’t drop the product on ground or let products be stroked forcefully.
6 .Fix product in places far from electric field or magnetic field
If camera is installed in those places near to TVL, wireless transmitter, Electromagnetism
equipment, transformer, speaker, the electromagnetism from them will interfere image effect.
7. Avoid humidity and dust
In ord
er to avoid camera damage, don’t install camera in the place with dust or vapor or high temperature.
8. Avoid high temperature
Don’t install camera in places where bring heat source to camera, or sunshine can irradiate, otherwise it will cause camera distort, fade or
other damage.
9. Cleanness
Use soft cloth with scour to wipe off spot, then dry camera with soft cloth.
Don’t use gasoline, dope thinner or other chemistry substance
