Benelli Cafe 1130 Racer, Использование и обслуживание

Страница: 40 / 47

75
76
6.9.1 Cleaning
The chain of TNT is of the O-ring type. To prevent it from damaging, never clean the chain with a steam or high
pressure water jet, nor using gasoline or other solvents.
The chain must be cleaned using kerosene only.
Kerosene is highly toxic and flammable.
Avoid contact and inhalation.
Keep kerosene away from sparks and flames.
Keep kerosene out of reach of children and domestic animals.
Correctly dispose of exhaust kerosene, in order to avoid environmental pollution.
If you are not sure that you can use kerosene in complete safety, don’t use it and, when you can go to a Benelli
authorized service center ask for the drive chain cleaning.
6.9.2 Lubrification
Chain lubrication has to be performed only by a Benelli authorized service center according to the intervals specified
in the tables of scheduled maintenance.
It is also necessary to perform this operation after riding under the rain and after cleaning the motorcycle.
Riding your motorcycle when the drive chain is in poor condition or improperly adjusted can lead to accidents.
To ensure proper operation, the drive chain needs to be properly lubricated.
6.10 Checking the idle speed
The idle speed should range from 1200 to 1300 rpm.
If a tune-up is necessary, contact an authorized service
centre.