Benelli BN125 2018 Скачать руководство пользователя

Страница: 73 / 75

Motorcycle care and storage

7 - 3

• and a mild detergent. Before ri-

ding at higher speeds, test the

motorcycle’s braking performan-

ce and cornering behavior.

NOTICE

• Apply spray oil and wax sparin-

gly and make sure to wipe off any

excess.

• Never apply oil or wax to any rub-

ber and plastic parts, but treat

them with a suitable care product.

• Avoid using abrasive polishing

compounds as they will wear away

the paint.

TIP

•

Consult a Benelli dealer for advice on

what products to use.

•

Washing, rainy weather or humid cli-

mates can cause the headlight lens

to fog. Turning the headlight on for a

short period of time will help remo-

ve the moisture from the lens.

Storage

Short-term

Always store your motorcycle in a cool, dry

place and, if necessary, protect it against

dust with a porous cover. Be sure the engi-

ne and the exhaust system are cool before

covering the motorcycle.

NOTICE

• Storing the motorcycle in a poor-

ly ventilated room or covering it

with a tarp, while it is still wet, will

allow water and humidity to seep

in and cause rust.

• To prevent corrosion, avoid damp

cellars, stables (because of the

presence of ammonia) and areas

where strong chemicals are sto-

red.

Long-term

Before storing your motorcycle for several

months:

•

Follow all the instructions in the

“Care” section of this chapter.

•

Fill up the fuel tank and add fuel sta-

bilizer (if available) to prevent the

fuel tank from rusting and the fuel

from deteriorating.

•

Perform the following steps to pro-

tect the cylinders, piston rings, etc.

from corrosion.

•

Remove the spark plug caps

and spark plugs.

•

Pour a teaspoonful of engine

oil into each spark plug bore.

•

Install the spark plug caps onto

the spark plugs, and then place

the spark plugs on the cylinder

head so that the electrodes are

grounded. (This will limit spar-

king during the next step.)

•

Turn the engine over several

times with the starter. (This will

coat the cylinder walls with oil.)

MUMBN125MY17.indb 1

05/04/2018 14:27:07

Содержание BN125 2018












































































Результаты поиска

Содержание BN125 2018

Отзывы:

Похожие инструкции для BN125 2018

Бренды по названию

Популярные бренды

Benelli BN125 2018, Руководство пользователя

Результаты поиска

Содержание BN125 2018

Отзывы:

Похожие инструкции для BN125 2018

Бренды по названию

Популярные бренды