Benelli BN125 2018, Руководство пользователя

Страница: 40 / 75

6 - 2
Periodic maintenance and adjustment
EN
6
Owner’s tool kit
The bike is provided with a tool bag.
The owner’s tool kit is located under the
passenger seat.
The service information included in this
manual and the tools provided in the ow-
ner’s tool kit are intended to assist you in
the performance of preventive mainte-
nance and minor repairs. However, addi-
tional tools such as a torque wrench may
be necessary to perform certain mainte-
nance work correctly.
TIP
If you do not have the tools or experience
required for a particular job, have a Benelli
dealer perform it for you.
A list of workshops is available on our
website www.benelli.com.
TIP
•
The annual checks must be perfor-
med every year, except if a kilome-
ter-based maintenance, or for the
UK, a mileage- based maintenance,
is performed instead.
• At the 13.000 Km (8.078 mi), cou-
pon, perform maintenance opera-
tions with the same intervals indica-
ted in the table.
•
Items marked with an asterisk
should be performed by a Benelli
dealer as they require special tools,
data and technical skills.
• The use of non-original replacement
parts may accelerate motorbike
wear and tear and cut shorts its life.
Failure to perform recommended
operations or the use of non-original
parts may render the legal warranty
null and void.
•
The replacement and/or topping up
of lubricants and luids, must only be
carried out with the recommended
products.
TIP
AIR FILTER
The air ilter needs to be replaced more
often if the vehicle is used in particularly
damp or dusty environments.
HYDRAULIC BRAKE MAINTENANCE
•
Check brake luid levels on a regular
basis and top up as necessary.
• Every two years replace the internal
components of the brake master
cylinders and calipers, and change
the brake fluid.
•
Replace the brake hoses every four
years and if cracked or damaged.
The following section shows all of the
maintenance operations
NO. Part
Maintenance
intervention
or control
0 Km
(0 mi)
Pre-delivery
1000 Km
(621mi)
1°
service
4000 Km
(2.486 mi)
2°
service
7000 Km
(4.350 mi)
3°
service
10.000 Km
(6.214 mi)
4°
service
13.000 Km
(8.078mi)
5°
service
Annual
inspection
1 Engine oil
Top up/Replacement I R R R R R R
Check Every 500 km (310 mi)
2 Oil filter Replacement I R R R R R R
3 ◙ Fuel filter Check/Replacement I I R I
4 ◙ Air Filter Check/Replacement I R I R
I I R I
7 ◙ Spark plugs Check/Replacement
Check the conditions, clean and restore the distance between electrodes
8 ◙
Transmission
Chain
Check chain tension Make
sure that the rear wheel is
correctly aligned Clean and
lubricate
Every 500 km and after every wash or if the motorcycle has been used in the rain.
9 ◙
Crown
Check//Lubricate
Replace every time the chain is replaced
10 ◙
Pinion/Retaining
washer
Check/Replacement
Replace every time the chain is replaced
I I I I I I
I I I I I I
11 ◙
Fuel circuit
hoses
Check for faults/leaks
In any case, replace every 3 years
I I I R
I I I I I I
5
◙
Parts and wires
subject to
movement
Check/Replacement
I I I I I I I
Replace if damaged.
6 ◙ Check/Replacement I I I I
LEGEND
I
Inspection and adjustment,
cleaning, lubrication or
replacement, as needed
R
Replacement
T
Tighten to the
torque listed
Dealer
MUMBN125MY17.indb 2 05/04/2018 14:26:57