BENE T Lift, Руководство по сборке и эксплуатации, Страница: 31 / 40

30 CONTROL MECHANISM. NORMAL OPERATION / PROGRAMMING.
Normal Operation
Manual table height adjustment:
• Press UP key to move table upward.
• Press DOWN key to move table downward.
(Drive mechanisms travel for as long as you hold down key)
Save settings (Memory):
• Adjust table to your specifications pressing UP / DOWN keys.
• Press M key three times to select Memory mode.
• Press one of keys M1, M2 or M3 within approx. 5 seconds to save settings.
• Control unit confirms saved settings by acoustic signal.
Recall saved settings:
Normal Memory:
Press key M1, M2 or M3 until reaching the saved position.
Programming
Programming:
Press the P key for approx. 4 seconds to select the Programming mode.
Select User:
(When no User is selected, the display blinks OFF and indicates SO).
•
Select the desired User pressing keys UP (1) / DOWN (2):
S 0 no User selected / no User indicated
S 1 User 1 selected / indicated
S 2 User 2 selected / indicated
S 3 User 3 selected / indicated
S 4 User 4 selected / indicated
• Press ENTER key to exit programming mode. The programmed User
remains for as long as another user is selected. All saved table settings cor
respond to the selected User.
Resetting from cm to Inch:
• Press key P to select the next menu.
• Select the desired display mode pressing the UP (1) / DOWN (2) keys.
• Press the ENTER key to exit the programming mode. (The selected
User remains for as long as another User is selected. All saved table set-
tings (Memory) correspond to the selected User.