![BendPak RJ-12 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/bendpak/rj-12/rj-12_installation-and-operation-manual_2732241008.webp)
8
STEP 1
(Verifying Lift Installation)
Before installing your new Rolling Bridge Jack, verify the
following aspects of the installation of the lift where Rolling
Bridge Jacks are being installed. The aspects of the lift
installation that need to be verified should include, but are
not limited to;
1. LIFT LOCATION / PROPER ALIGNMENT
2. OVERHEAD OBSTRUCTIONS.
3. CORRECT FLOOR COMPOSITION/
REQUIREMENTS.
4. OPERATING
TEMPERATURE.
5. INDOOR INSTALLATION ONLY.
6. OPERATION MANUALS ON HAND .
7. OPERATORS PROPERLY TRAINED.
OPERATING TEMPERATURE.
Operate Rolling Bridge Jack only between
temperatures of 41° -104° F.
STEP 2
(Rolling Jack Capacities)
THE MAXIMUM LIFTING CAPACITY OF
THESE JACKS ARE DESCRIBED BELOW.
DANGER !
IT IS THE RESPONSIBILITY OF THE OWNER /
INSTALLER OF THIS ROLLING BRIDGE JACK TO
ENSURE THAT THE LIFT UPON WHICH THE ROLLING
BRIDGE JACK IS INSTALLED HAS BEEN PROPERLY
INSTALLED ACCORDING TO THE MANUFACTURER’S
SPECIFICATIONS.
IMPORTANT NOTE!
These instructions must be followed to insure proper installation and operation of your Rolling Bridge
Jack. Failure to comply with these instructions can result in serious bodily harm and void product
warranty. Manufacturer will assume no liability for loss or damage of any kind, expressed or implied
resulting from improper installation or use of this product.
PLEASE READ ENTIRE MANUAL PRIOR TO INSTALLATION !
Hex-Key / Allen Wrench Set
Medium Crescent Wrench
Shop Crane or other heavy lifting device
Medium Flat Screwdriver
Tape Measure: @ 25 Foot
Air Fitting (to connect air supply)
TOOLS REQUIRED
MODEL
MAX JACK
CAPACITY
MAX VEHICLE WEIGHT
FRONT AXLE
MAX VEHICLE WEIGHT
REAR AXLE
RJ-45/S
4,500 Lbs/ 2,041 Kgs
4,500 Lbs/ 2,041 Kgs
4,500 Lbs/ 2,041 Kgs
RJ-6
6,000 Lbs / 2,721 Kgs
6,000 Lbs / 2,721 Kgs
6,000 Lbs / 2,721 Kgs
RJ-7
7,000 Lbs / 3,175 Kgs
7,000 Lbs / 3,175 Kgs
7,000 Lbs / 3,175 Kgs
RJ-9
9,000 Lbs / 4,082 Kgs
9,000 Lbs / 4,082 Kgs
9,000 Lbs / 4,082 Kgs
RJ-12
12,000 Lbs / 5,443 Kgs
12,000 Lbs / 5,443 Kgs
12,000 Lbs / 5,443 Kgs
RJ-15
15,000 Lbs / 6,804 Kgs
15,000 Lbs / 6,804 Kgs
15,000 Lbs / 6,804 Kgs
RJ-18
18,000 Lbs / 8,165 Kgs
18,000 Lbs / 8,165 Kgs
18,000 Lbs / 8,165 Kgs
RJ-25
25,000 Lbs / 11,340 Kgs
25,000 Lbs / 11,340 Kgs
25,000 Lbs / 11,340 Kgs
DANGER !
The AXLE WEIGHT of the vehicle being raised should
not exceed the maximum capacity of the Rolling Bridge
Jack. Consult the vehicle manufacturer for
specifications.
NOTE:
An air supply (125 PSI Minimum / 10-20 CFM Minimum) will be required for operation.
Содержание RJ-12
Страница 2: ...2 This page intentionally left blank...
Страница 10: ...10 Fig 3 2...
Страница 16: ...16...
Страница 20: ...20...