P-9000LT/F Low-Rise Pit Lift
45
P/N 5900022 — Rev. B — Nov. 2019
⚠
WARNING
If the Lift becomes unstable, release the
Raise
button and immediately evacuate
the area. If safe to do so, carefully lower the Platforms back down to the ground.
10.
Release
Raise
when the Vehicle’s wheels are about 6 in / 152 mm off the ground.
The Platforms stop.
11.
Make sure all four Lift Blocks are in firm contact with the factory-recommended Lifting Points.
If the Lift Blocks
are
in the right positions, do not move them.
If the Lift Blocks are
not
in the right positions, press and hold
Lower
and
carefully
return the
Vehicle to the ground, then restart the process from the beginning.
12.
If the Lift Blocks are in the right positions, rock the Vehicle gently to test for stability.
If the Vehicle is stable, press and hold
Raise
to continue raising Vehicle.
If the Vehicle is
not
stable, press
Lower
and
carefully
return the Vehicle to the ground, then
start the raising process from the beginning.
13.
To engage both Platforms on Safety Locks, raise the Vehicle just past the desired Safety Lock (you
will hear a clank when it passes), release
Raise
, then press
Lower
.
The Platforms will stop moving down when they engage on the Safety Locks; release
Lower
.
⚠
WARNING
Before doing anything else (like working on the Vehicle or leaving the area),
visually
confirm
that
both
Platforms are engaged on the same Safety Locks and all Lift
Blocks are in stable contact with the Vehicle’s factory-recommended Lifting Points.
14.
Confirm that both Platforms are engaged on the same Safety Locks and that all Lift Blocks are in
stable contact with the Vehicle’s factory-recommended Lifting Points.
Lowering a Vehicle
This section describes how to lower a Vehicle from a raised position.
To lower a Vehicle
:
1.
If you find any issues, resolve them
before
attempting to lower a Vehicle.
2.
At the Console, press and hold the
Raise
button for a couple of seconds.
This moves the Platforms off the Safety Locks, which is required for them to lower.
3.
Press and hold the
Safety Lock Release
button, then press and hold the
Lower
button.
Pressing and holding the
Safety Lock Release
button causes the Air Cylinder to push up and
hold up the Lock Release Bar, preventing the Lock Bar from engaging on Safety Locks as the
Platforms lower. If you do not press and hold the
Safety Lock Release
button, the Platforms
will engage on the closest Safety Lock instead of lowering.
The Platforms begin lowering.
⚠
WARNING
If the Lift becomes unstable at any point before it is fully lowered to the ground,
release the
Lower
button and immediately evacuate the area. If safe to do so,
return to the Console and carefully lower the Platforms back down to the ground.
4.
When the Platforms are fully lowered, release both buttons.
Содержание P-9000LT
