BendPak HD-9AE, Инструкция по установке и эксплуатации

Страница: 15 / 52

15
3. You must reinstall the SHEAVES AND PINS in the same
order as they are removed. ( See Fig. 7.2-7.3)
WARNING!
WHEN THE CABLE ADJUSTING NUTS BOTTOM OUT ON THE THREADED END OF THE CABLE
CONNECTOR AND THERE IS STILL SLACK IN THE CABLES, THE CABLES HAVE STRETCHED BEYOND THE
SAFE USEFUL LENGTH AND NEED TO BE REPLACED WITH FACTORY APPROVED CABLE ASSEMBLIES.
DO NOT PLACE WASHERS, SPACERS OR OTHER DEVICES TO “SHORTEN” THE EFFECTIVE CABLE LENGTH
AS DAMAGE TO THE LIFT OR INJURY TO PERSONS MAY OCCUR.
HELPFUL TIP
INSTALL THE SHEAVES AND CABLES IN THE ORDER AS
SHOWN BELOW STARTING FROM THE SHORTEST (A)
TO THE LONGEST (D).
Cable “A”
Fig 7.4
Cable “C”
Fig 7.5
Cable “B”
Fig 7.6
Cable “D”
Fig 7.7
Sheave Axle
Fig 7.2
Socket
Head Cap
Screw
Sheave
Fig 7.3
Sheave Axle
Socket
Head Cap
Screw
Sheave