KGX 150/130 Transceivers and Receivers
D201405000060
REV 0
Oct 2014
2-5
KGX Control Panel
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 2--1
List of Common VFR Squawk Codes
Squawk Code
Number
Description
1200
VFR code in the USA
7500
Hijack code
7600
Loss of communications
7700
Emergency code
The Call Sign/Flight ID should correspond to the aircraft call sign
entered on flight plan. If no flight plan is active, the aircraft registration
should be used as the Call Sign/ Flight ID. Use only letters and digits.
If the Call Sign/Flight ID is less than 8 characters long, entering a blank
character will end it.
PUSH BUTTONS
The push buttons are defined in the following paragraphs:
IDT
-- Push the
IDT
button to activate
the Identification function. The
IDT
button on the KGX Control Panel is
disabled when the squawk code is
displayed in reverse video. See the
External Control subsection later in this
section.
VFR
-- Pushing the
VFR
button sets the
ADS--B to the pre--programmed code
and VFR Flight ID. Pushing the button
again restores the previous squawk
code and Flight ID.
ENT
-- The
ENT
button enters a digit in
the code selector.
