2
GENERAL SAFETY GUIDELINES
WARNING! PLEASE READ AND FOLLOW THESE INSTRUCTIONS
TO AVOID PERSONAL INJURY OR DEATH:
When working on or around a vehicle, the following guidelines should be observed AT ALL TIMES:
▲
Park the vehicle on a level surface, apply the
parking brakes, and always block the wheels.
Always wear personal protection equipment.
▲
Stop the engine and remove the ignition key
when working under or around the vehicle.
When working in the engine compartment,
the engine should be shut off and the ignition
key should be removed. Where circumstances
require that the engine be in operation, EXTREME
CAUTION should be used to prevent personal
injury resulting from contact with moving,
rotating, leaking, heated, or electrically charged
components.
▲
Do not attempt to install, remove, disassemble,
or assemble a component until you have read,
and thoroughly understand, the recommended
procedures. Use only the proper tools and
observe all precautions pertaining to use of those
tools.
▲
If the work is being performed on the vehicle’s
air brake system, or any auxiliary pressurized air
systems, make certain to drain the air pressure
from all reservoirs before beginning ANY work
on the vehicle. If the vehicle is equipped with
a Bendix
®
AD-IS
®
air dryer system, a Bendix
®
DRM
™
dryer reservoir module, a Bendix
®
AD-9si
®
,
AD-HF
®
, or AD-HFi
™
air dryer, be sure to drain the
purge reservoir.
▲
Following the vehicle manufacturer ’s
recommended procedures, deactivate the
electrical system in a manner that safely removes
all electrical power from the vehicle.
▲
Never exceed manufacturer’s recommended
pressures.
▲
Never connect or disconnect a hose or line
containing pressure; it may whip and/or cause
hazardous airborne dust and dirt particles. Wear
eye protection. Slowly open connections with
care, and verify that no pressure is present. Never
remove a component or plug unless you are
certain all system pressure has been depleted.
▲
Use only genuine Bendix
®
brand replacement
parts, components, and kits. Replacement
hardware, tubing, hose, fittings, wiring, etc.
must be of equivalent size, type, and strength as
original equipment and be designed specifi cally
for such applications and systems.
▲
Components with stripped threads or damaged
parts should be replaced rather than repaired.
Do not attempt repairs requiring machining or
welding unless specifi cally stated and approved
by the vehicle and component manufacturer.
▲
Prior to returning the vehicle to service, make
certain all components and systems are restored
to their proper operating condition.
▲
For vehicles with Automatic Traction Control
(ATC), the ATC function must be disabled (ATC
indicator lamp should be ON) prior to performing
any vehicle maintenance where one or more
wheels on a drive axle are lifted off the ground
and moving.
▲
The power MUST be temporarily disconnected
from the radar sensor whenever any tests USING
A DYNAMOMETER are conducted on a vehicle
equipped with a Bendix
®
Wingman
®
system.
▲
You should consult the vehicle manufacturer's operating and service manuals, and any related literature,
in conjunction with the Guidelines above.
Due to the inherent limitations of image recognition
technology, camera-based safety technology — on
rare occasions — may not be able to detect or may
misinterpret lane markings. At these times, alerts
may not occur, or erroneous alerts may occur.
Bendix safety technologies complement safe driving
practices. No commercial vehicle safety technology
replaces a skilled, alert driver exercising safe driving
techniques and proactive, comprehensive driver
training. Responsibility for the safe operation of the
vehicle remains with the driver at all times.
Improper use of the Bendix
®
Wingman
®
Fusion
™
Driver
Assistance System can result in a collision causing
property damage, serious injuries, or death. Be sure to
read, understand, and carefully follow the instructions
in the Operator’s Manual (BW2681).
IMPORTANT
It is the responsibility of the driver to remain
vigilant and change driving practices depending
on traffic and road conditions.
