Bender grass valley KMX-4911, Быстрый старт

Страница: 4 / 25

iv
Notices
Certification and Compliance
Safety of Laser Modules
This equipment may incorporate modules containing Class 1 lasers. These
modules are certified by the manufacturer to comply with:
– IEC/EN 60825-1:2014 Safety of laser products
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Code of
Federal Regulations, Title 47, Part 15 (47 CFR 15), Subpart B, Class A, Digital Devices,
Unintentional Radiators.
This equipment has been tested and found to comply with the requirements of the
EMC directive 2004/108/EC:
• EN 55022:2010 Class A radiated and conducted emissions
• EN 61000-3-2:2014 Limits for harmonic current emissions
• EN 61000-3-3:2013 Limitation of voltage changes, voltage fluctuations and
flicker
• EN 61000-4-2:2009 Electrostatic discharge immunity
• EN 61000-4-3:2006+A1:2008+A2:2010 Radiated, radio-frequency,
electromagnetic field immunity
• EN 61000-4-4:2004+A1:2010 Electrical fast transient/burst immunity
• EN 61000-4-5:2006 Surge transient immunity
• EN 61000-4-6:2009 Conducted disturbances immunity
• EN 61000-4-8:2010 Power frequency magnetic field immunity
• EN 61000-4-11:2004 Voltage dips, short interruptions and voltage variations
immunity
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.