Bender EDS460-DG, Руководство по эксплуатации

Страница: 43 / 76

Operation
43 TGH1429en/10.2008
6.4.3 Menu 3: settings
The following menu items are available for configuring the EDS...:
Menu item Function Page
Exit Exit settings -
1.General Configure the fault memory, trigger, rated fre-
quency and type of system. 44
2.Channel Configure the following in respect of each
measuring channel: Response value, measur-
ing transformer type, response delay, delay on
release, measuring transformer monitoring, fil-
ters for systems with converters, and alarm
when the residual current has been exceeded. 45
3.Relay Set the mode of operation and type of fault
that you wish to cause a switching operation
for common alarm relay. 48
4.History Erasing the history memory 50
5.Language Select the language for menu and alarm texts. 50
6.Interface Set the BMS bus address of the EDS460-DG. 50
7.Alarm-
addresses Setting of bus addresses for devices whose
alarm messages are to be displayed on this
EDS460-DG. 50
8.Clock Configure the time, date, date format and
summer time changeover. 51
9.Password Changing and activating the password. 52
10.Factory
setting Resets every setting to its factory setting. 52
11.Service For Bender service staff only. 52