CC612(4G)_D00325_06_M_XXEN/09.2021 7
CC612 charge controller
2
Function
2.1
Intended use
The CC612 charge controller, hereafter referred to as the charge controller, is the main component of a charg-
ing system and is designed for use in electric vehicle (EV) charging stations, wall boxes and street light charg-
ing points. The charge controller controls type 1 and type 2 plugs, and type 1 and type 2 sockets.It enables a
setup that complies with the requirements of current standards, e.g. IEC 61851-1 and IEC 62955.
Any use other than that described in this manual is regarded as improper.
2.2
Product features (depending on the variant)
• Charge controller in accordance with IEC 61851-1 (mode 3 charging)
• Master and slave operation configurable
• Can be integrated in single- or three-phase systems up to 80 A
• Smart Grid enabled using standard OCPP functionality
• OCPP 1.5 and OCPP 1.6 compliant with JSON, SOAP and Binary implementation
• Supported mobile networks: 4G (LTE), 3G (UMTS) and 2G (GSM) with an integrated 4G modem
• 2 USB interfaces:
– 1 CONFIG for local configuration
– Extension port for peripheral USB devices (Ethernet/WiFi home applications)
• Master/slave hardware configuration
• Control Pilot and Proximity Pilot signal management
• Universal charge plug control (support for different vendors of sockets)
• Configurable support for one additional household socket
• Can connect to eHZ or Modbus meters and to meters with an S0 interface
• User interface board for customer-specific applications
• Configurable 3-channel input/output extension interface for additional functionality
• Only an external RCD type A is required
• Continuous monitoring of AC and DC fault currents using the patented DC fault current monitoring
module
• Internal temperature sensors
• Dynamic load management to optimally distribute the available power among all charging points
and signal the maximum power to the vehicle
• ISO/IEC 15118 power line communication (PLC) for plug & charge and load management systems
